Aluminum window RPT 45 Practicable Tilt and turn 1200X1155 2 leaves with motorized blind and aluminum slats

Hollow size: Width 120cm, Height 115.5cm.

Description: Aluminum window with THERMAL BRIDGE BREAK Tilt-and-turn practicable with opening to the left, 120cm Width × 115.5cm Height, 2 Climalit glass leaves and motorized shutter with push button and aluminum slats. Range window HIGH AVERAGE. Thermal break windows (RPT) are an ideal choice for cold climates.

Profiling: series with thermal break through polyamides with European channel. It has a gasket on the leaf and a central gasket on the frame.

AEV trials: According to the UNE-EN 14351-1: 2006 + A1 standard, air permeability "Class 4", watertightness "Class AE750", resistance to wind load "Class C5" (values obtained from window 1480 × 1230 2 sheets ).

Thermal calculation: Uw = 2.3 W / m²K according to standard EN.ISO 10077-2: 2012 considering double glazing in a 1480 × 1230 2-leaf window (4-16-4 with low emissivity + argon). The product is considered as mid-high range fulfilling all the objectives with exceptional results within its category.

Glass: The glass is composed of 2 layers, inside a 4mm low emissive glass, between the glasses a 16mm chamber with 90% argon gas and outside, another 4mm carglass glass, always with a Climalit seal. The glass is held by an internal bead and an external joint. All gaskets are made of high quality EPDM material.

Blind drawer: pvc blind box with high thermal insulation chamber and profiled aluminum slats injected with expanded polystyrene and extruded terminal.

Shutter motorization: blind motor installed and regulated Italian brand nice ttgo 15 Nm analog. It incorporates a 2 meter connection cable that comes out laterally through the right end of the blind box.

Motorization button: the product is delivered with a specific button for shutter motors and with a connection manual. Includes a universal recessed box for work.

Locking system: high quality aluminum cremone bolt with three positions, closed and practicable and hinged. Knitted closure on various points of the frame.

Security level: Depending on the dimension, they are installed from two points to four points. In balcony doors, a third closing point is installed on the side between the hinges to create greater resistance in security and improve the level of watertightness.

Accessory regulation: the hardware system allows three-dimensional regulation.

Corner junctions: At the junctions of the frames and the leaves, they have high-quality and resistant aluminum joints installed that prevent the structure from deteriorating. They also make it possible to change the profile if necessary.

Glass: The glass is composed of 2 layers of 4mm foat and a 16mm chamber dehydrated with Argon gas with a Climalit seal.