Aluminum window RPT 45 Practicable Tilt-and-turn 1000X1155 2 leaves with motorized blind and aluminum slats

Hollow size: Width 100cm, Height 115.5cm.

Description: Aluminum window with THERMAL BRIDGE BREAK Practical Tilt-and-turn with opening to the left, 100cm Width × 115.5cm Height, 2 leaves with double glazing and motorized blinds with push-button and aluminum slats. range window HIGH AVERAGE. Thermal break windows (RPT) are an ideal choice for cold climates.

Profiling: series with thermal break through polyamides with European channel. It has a gasket on the leaf and a central gasket on the frame.

AEV trials: According to the UNE-EN 14351-1: 2006 + A1 standard, air permeability "Class 4", watertightness "Class AE750", resistance to wind load "Class C5" (values obtained from window 1480 × 1230 2 sheets ).

Thermal calculation: Uw = 2.3 W / m²K according to standard EN.ISO 10077-2: 2012 considering double glazing in a 1480 × 1230 2-leaf window (4-16-4 with low emissivity + argon). The product is considered as mid-high range fulfilling all the objectives with exceptional results within its category.

Glass: The glass is composed of 2 layers, on the inside a 4mm low-e glass, between the glasses a 16mm chamber with 90% argon gas and on the outside, another 4mm carglass glass, always with double glazing. The glass is held in place by an interior bead and an exterior joint. All gaskets are made of high quality EPDM material.

Blind drawer: pvc blind box with high thermal insulation chamber and profiled aluminum slats injected with expanded polystyrene and extruded terminal.

Shutter motorization: blind motor installed and regulated Italian brand nice ttgo 15 Nm analog. It incorporates a 2 meter connection cable that comes out laterally through the right end of the blind box.

Motorization button: the product is delivered with a specific button for shutter motors and with a connection manual. Includes a universal recessed box for work.

Locking system: high quality aluminum cremone bolt with three positions, closed and practicable and hinged. Knitted closure on various points of the frame.

Security level: Depending on the dimension, they are installed from two points to four points. In balcony doors, a third closing point is installed on the side between the hinges to create greater resistance in security and improve the level of watertightness.

Accessory regulation: the hardware system allows three-dimensional regulation.

Corner junctions: At the junctions of the frames and the leaves, they have high-quality and resistant aluminum joints installed that prevent the structure from deteriorating. They also make it possible to change the profile if necessary.

Glass: The glass is composed of 2 layers of 4mm foam and a 16mm chamber dehydrated with Argon gas with double glazing.